Technical
TXDELS Non-Dim Constant Current Driver.
LEDs use specific drivers to run them, they are different from normal low voltage fittings in that they must be wired in series and need a constant current. They may be located 10 metres from a luminaire, with an ‘in series’ wiring method required.
Single LED fittings
If using a dedicated LED fittings 1.2W/350mA or 1.7W/500mA drivers will run 1-14 x fittings or 2.4W/700mA drivers will run 1 - 13 x fittings
2 x Single LED fittings
If using a dedicated LED fittings 2.4W/350mA or 3.4W/500mA drivers will run 1-7 x fittings or 4.8W/700mA drivers will run 1 - 6 x fittings
3 Cluster LED fittings
If using dedicated LED fittings 3.6W/350mA or 5.1W/500mA drivers will run 1 - 4 x fittings
4 Chip LED fittings
If using dedicated LED fittings 5W/350mA or 7W/500mA drivers will run 1 - 4 fittings
2 x 4 Chip LED fittings
If using dedicated LED fittings 2 x 5W(10W)/350mA or 2 x 7W(14W)/500mA drivers will run 1 - 2 fittings
Specification
Number of outputs/circuits: 1
Dimmable: No
Output Current (mA): 350/500/700mA
Output Voltage (V): 2-55V
Dimensions L x W x H (mm): 210x41x34
Hole Cut - out (mm): 51Ø
IP Rating: Not IP rated. If this is required they it can be supplied in IP rated box - please ask.
Resource
TXDEL350S Size: (630.81 KB) | |
TXDEL700S Size: (630.13 KB) | |
TXDEL500S Size: (630.34 KB) |