Technical
The LD59 is a square wall washer with no lens optics creating a soft beam of light with no multiple shadows
There are no visible fixings making the LD59 an attractive fitting for any type of surroundings and with being IP67 as standard it makes the fitting very versatile too
The higher the current mA the fitting is run at the more light you will get but the warmer the fittings gets. The LD59 can be driven up to a current of 700mA (2.4W) with an ambient temperature of 45°C.
Driver options
The LD59 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
Installation Notes
The fittings should be wired in series and the cable run between the driver and the fitting should not exceed 10m. The driver should be located somewhere discrete, allowing air movement and be accessible for maintenance
Resource
LD59 Size: (881.16 KB) |