A tiny, excellent quality and simple LED fitting useful for a wide range of accent lighting. IP68.
The fitting is either directly bonded with the surface or held in place by ‘O’ Rings and a /480 installation sleeve. The LD41 bezel is exactly the same size as the /480 sleeve (if required). If a larger bezel is needed (for example to hide the edges of a cut-out) please see the LD60.
Comes pre-wired with a 2 core 100mm cable.
The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.
The LD41 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
|LD41 Datasheet Size: (751.8 KB)||
Detailed Specifications and installation drawings