Technical
This discrete low glare recessed wall light with either square (LD45) or round (LD46) bezel. It has a recessed optic, without a tilt, and no visible fixings.
IP65, it can be used for internal or external applications. The integral anti-wicking barrier increases protection against moisture ingress due to incorrect IP rated cable connections, although these are still required.
See the product spec sheet in Downloads for fixing options. Comes pre-wired with a 2 core 100mm cable.
The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.
Driver Options
The LD45 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
Installation Notes
The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
Resource
LD45 & LD46 Data Sheet Size: (876.65 KB) |