LD47 Low Glare Tilted Interior/Exterior Wall or Step Light
Move your mouse over image

  • LD47 Low Glare Tilted Interior/Exterior Wall or Step Light
  • LD47
  • LD47 used to light stair treads
  • LD47 Dimensions and Spring Clip (/SC) fixing option
  • LD47 Dimensions - 'O' rings and sleeve fixing option (/477)
  • LD47 Specifications
LGPX LD47

LD47 Low Glare Tilted Interior/Exterior Wall or Step Light

A discrete extremely low glare fitting with a recessed optic and a 20 degree tilt. Perfect for stair lighting. Delivers 126 lumens.

The angled optic enables the fitting to be mounted slightly higher over a tread (c.200-250mm above) and for the light to still wash across the surface. The tilt also reduces glare when the fitting is seen front on.

Can be used for internal or external applications and has an integral anti-wicking barrier to increase protection against moisture ingress due to incorrect IP rated cable connections. Fixing options include spring fixing clips for stud walls or ‘O’ rings and a first fix sleeve for solid walls and/or wet areas. See product specification sheet in Downloads.

Quality of light is excellent and longevity is achieved with very good thermal management. A 50,000 life expectancy and a 3 Year fitting warranty.

Designed and made in the UK.

To get the perfect results you choose the product attributes (eg; output, beam width etc) below. These fittings need a separate driver and you will be taken through to the Driver Options page next. Because you are taken through automatically when you add fittings to the Basket, we suggest that you read the Technical Section below first. This will help you make the right driver choice.

For help with all of the product attribute choices please read our Technical Reference Guide (see pdf download below). See the product spec sheet in Downloads for fixing options.

Average delivery 2-4 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA, 700mA
Max Watts/Fitting 1.2W @ 350mA/ 1.7W @ 500mA/ 2.4W @ 700mA
Max output (Lumens) at 3000K

350mA:-  76lm
500mA:-  101lm
700mA:-  126lm

What is this?

How hard the fitting is run. The higher the mA the more light output.

X
What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

X
What is this?

The colour of light. We use 2700K and 3000K most often.

X
What is this?

The narrower the beam the more focused the light and the further it travels.

X
What is this?

The colour and finish of the bezel.

X
What is this?

Chose a fixing method appropriate to where the fitting is going.

X

* Required Fields

£151.64

Technical

A very classy LED fitting useful for a wide range of accent lighting.  IP65.

The fitting comes either with spring clips or held in place by ‘O’ Rings and an installation sleeve.  Comes pre-wired with a 2 core 100mm cable.

The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.  

Driver Options

The LD47 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver 

Installation Notes

The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m.  The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.

N.B.  Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.

Resource

View FileLD47 & LD48 Data Sheet    Size: (938.04 KB)

Ask a question

  • This field is for validation purposes and should be left unchanged.