Move your mouse over image

  • LD48
  • LD48 Dimensions and Spring Clip (/SC) fixing option
  • LD48 Dimensions - 'O' rings and sleeve fixing option (/477)

LD48 Low Glare Tilted Interior/Exterior Wall or Step Light

A discrete low glare fitting with a recessed optic and a 20 degree tilt. Perfect for stair/wall lighting

Can be used internally or externally with fixing options to suit application

Available in a number of outputs with a choice of LED colour, lens angle and bezel finish - custom made to your requirements

Requires remote driver - see technical information for further details 

UK FlagDesigned and made in the UK.

Average delivery 2-4 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA, 700mA
Max Watts/Fitting 1.2W @ 350mA/ 1.7W @ 500mA/ 2.4W @ 700mA
Max output (Lumens) at 3000K

350mA:-  76lm
500mA:-  101lm
700mA:-  126lm

What is this?

How hard the fitting is run. The higher the mA the more light output.

What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

What is this?

The colour of light. We use 2700K and 3000K most often.

What is this?

The narrower the beam the more focused the light and the further it travels.

What is this?

The colour and finish of the bezel.

What is this?

Chose a fixing method appropriate to where the fitting is going.


* Required Fields



The angled optic enables the fitting to be mounted slightly higher over a tread (c. 200 -250mm above) and for the light to still wash across the surface. The tilt also reduces glare when the fitting is seen front on.

To get the perfect results to suite your application you choose the product attributes (eg - output, beam with etc) The higher the current (mA) the fitting is run at the more light you will get   

The fitting has an anti-wicking barrier to increase protection against moisture ingress through the cable. The fitting is IP67 rated so suitable for a wide range of internal and external applications. Comes pre-wired with a 2 core 100mm cable  

Fixing options include spring fixing clips for stud walls and a first fix sleeve for solid walls and/or wet area, see product specification sheet in Downloads for more information.

With delivered lumens of 126 and a CRI of 93 the quality of light is excellent and longevity is achieved with very good thermal management. LED lifetime (to 70% lumen maintenance) 50,000hrs at a max ambient temperature of 35°C

Designed and manufactured in the UK

If you require an install sleeve quicker than the estimated lead time then please tick the 'installation accessories advanced shipment' box after you have added the fittings to your basket.

Driver options -

The LD48 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver 

With an appropriate driver the fitting is dimmable via 1-10V, DMX, DALI and mains leading/trailing edge or non dimmable

Installation Notes -

The fittings should be wired in series and the cable run between the driver and the fitting should not exceed 10m. The driver should be located somewhere discrete, allowing air movement and be accessible for maintenance 


There are currently no resources for this product.

Ask a question