Technical
The LD51 is an IP67 miniature low glare surface mounted LED Spot. It delivers very high light output (119 lumens) for its size and is ideal for garden/planter lighting and accent lighting, e.g., on beams.
They are rated IP67 making them suitable for interior or exterior applications. When used externally it is imperative that properly waterproof connections are made, to prevent water tracking up through the cable.
Two accessories are available: A glare cowl which can be rotated to hide glare from odd angles, and a soil spike which is ideal for garden/planter lighting.
Comes pre-wired with a 2 core 0.5m lead.
The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.
Driver Options
The LD51 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
Installation Notes
The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
Resource
LD51 Data Sheet Size: (750.94 KB) |