LD52 is a very low depth triple LED uplight. It is ideal for applications where mounting depth is at a minimum but good output is required.
It utilizes the latest LED technology with new high efficiency optics which guarantees excellent beam spread and shape. IP67, it is has been designed with a walk over stainless steel bezel and toughened glass.
Fixing is by 3 spring clips or by the /484S first fix sleeve and O rings; this provides a watertight seal ideal for external applications. LD52 can be driven up to a current of 500mA (5.1W) at an ambient temperature of 45°C.
Comes pre-wired with a 2 core 100mm cable.
The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.
The LD52 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
|LD52 Data Sheet Size: (688.15 KB)|