LD59 recessed wall washer
Move your mouse over image

  • LD59 recessed wall washer
  • LD59 recessed wall washer
  • LD59 recessed wall washer
  • LD59 recessed wall washer

LD59 recessed wall washer

90 x 90mm square recessed low glare wall washer which uses a single LED to create a soft beam of light

With no visible fixings the LD59 is a smart option for wall lighting both for modern and more traditional properties

As standard the LD59 is IP67 rated making perfect for external and internal applications or areas where a higher IP rating is required such as a bathroom

Choice of fixing methods – spring clips or a first fix concrete box

Typical CRI of 93 with a Warm White LED

Quality of light is excellent and longevity is achieved with very good thermal management

A 50,000 life expectancy and a 3 year fitting warranty

UK flagDesigned and made in the UK.


To get the perfect results you choose the product attributes (eg output, beam width etc) below. The fittings need a separate driver and you will be taken through to the Driver Options page next. Because you are taken through automatically when you add fittings to the Basket, we suggest you read the Technical Section below first. This will help you make the right driver choice. For help with all the product attribute choices read our Technical Reference Guide (see pdf download below)

Average delivery 2-4 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA, 700mA
Max Watts/Fitting 1.2W @ 350mA
1.7W @ 500mA
2.4W @ 700mA
Max output (Lumens) at 3000K 350mA:- 62lm
500mA:- 101lm
700mA: - 135lm
What is this?

How hard the fitting is run. The higher the mA the more light output.

What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

What is this?

The colour of light. We use 2700K and 3000K most often.

What is this?

The colour and finish of the bezel.

What is this?

Chose a fixing method appropriate to where the fitting is going.


* Required Fields



The LD59 is a square wall washer with no lens optics creating a soft beam of light with no multiple shadows

There are no visible fixings making the LD59 an attractive fitting for any type of surroundings and with being IP67 as standard it makes the fitting very versatile too

The higher the current mA the fitting is run at the more light you will get but the warmer the fittings gets. The LD59 can be driven up to a current of 700mA (2.4W) with an ambient temperature of 45°C.

Driver options

The LD59 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver

Installation Notes

The fittings should be wired in series and the cable run between the driver and the fitting should not exceed 10m. The driver should be located somewhere discrete, allowing air movement and be accessible for maintenance


View FileLD59    Size: (881.16 KB)

Ask a question