LD60 LED accent light
Move your mouse over image

  • LD60 LED accent light
  • LD60 Dimensions.  All measurements are in mm.
  • LD60 uplighting a striking modern bath.  Lighting Design by Brilliant Lighting
LGPX LD60

LD60 LED accent light

A tiny, high quality but simple LED fitting useful for a wide range of accent lighting.  Delivers 93 lumens. 

The LD60 has a slightly bigger bezel than an LD41 making it slightly more 'forgiving' of a not completely perfect cut out.  A staple fitting in our schemes, it's great for subtle uplighting, niche, and display lighting.  It has an excellent Colour Rendering Index of 93.  If reduced glare is required please see LD72, LD56, LD42 or LD46 depending on application.

IP68 rated, the tough fitting is made from a solid billet of stainless steel 316, and an integral anti-wicking barrier increases protection against moisture ingress due to incorrect IP rated cable connections.  See product specification sheet in Downloads for fixing options.

Quality of light is excellent and longevity is achieved with very good thermal management.  

A 50,000 hour life expectancy and a 3 Year fitting warranty. 

Designed and made in the UK.

To get the perfect results you choose the product attributes (eg; output, beam width etc) below.  These fittings need a separate driver and you will be taken through to the Driver Options page next.  Because you are taken through automatically when you add fittings to the Basket, we suggest that you read the Technical Section below first.  This will help you make the right driver choice.  For help with all of the product attribute choices please read our Technical Reference Guide (see pdf download below).  

See the product spec sheet in Downloads for fixing options.  If you require an Install Sleeve more quickly than you need the fittings themselves please ask for 'Installation Accessories Advance Shipment' after you've added the fittings to your Basket.

Average delivery 2-4 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA
Max Watts/Fitting 1.2W @ 350mA / 1.7W @ 500mA
Max output (Lumens) at 3000K

350mA:- 72lm
500mA:- 95lm

What is this?

How hard the fitting is run. The higher the mA the more light output.

X
What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

X
What is this?

The colour of light. We use 2700K and 3000K most often.

X
What is this?

The narrower the beam the more focused the light and the further it travels.

X
What is this?

The colour and finish of the bezel.

X
What is this?

Chose a fixing method appropriate to where the fitting is going.

X

* Required Fields

£76.27

Technical

A tiny, excellent quality and simple LED fitting useful for a wide range of accent lighting.  IP68.

The fitting is either directly bonded with the surface or held in place by ‘O’ Rings and a /480 installation sleeve.  Comes pre-wired with a 2 core 100mm cable.

The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.  

Driver Options

The LD60 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver 

Installation Notes

The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m.  The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.

N.B.  Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.

Resource

View FileLD60 Data Sheet    Size: (657.3 KB)

Ask a question

  • This field is for validation purposes and should be left unchanged.