LD72 image 1
Move your mouse over image

  • LD72 image 1
  • LD72 image 2
  • LD72 image 3
  • Product Dimensions.  All measurements shown in mm.

LD72 LED downlight

Miniature low glare LED downlight delivering 127 lumens.  Ideal for niches or creating a discrete wall wash.

This tiny LED downlight has a minimal bezel and the LED set back by 10mm for minimal glare.  Great for display lighting or (for the IP54 version) shower niche lighting.  Also creates stunning wall wash effects: use every c.350-400mm apart to create a striking effect down a feature wall.

It utilizes the latest LED technology with a typical CRI of 93 in warm white.  As standard the LD72 is IP40 rated (this version), but can be specified as IP54. 

Quality of light is excellent and longevity is achieved with very good thermal management.  

A 50,000 life expectancy and a 3 Year fitting warranty. 

Designed and made in the UK.

To get the perfect results you choose the product attributes (eg; output, beam width etc) below.  These fittings need a separate driver and you will be taken through to the Driver Options page next.  Because you are taken through automatically when you add fittings to the Basket, we suggest that you read the Technical Section below first.  This will help you make the right driver choice.  For help with all of the product attribute choices please read our Technical Reference Guide (see pdf download below). 

Average delivery 2-4 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA, 700mA
Max Watts/Fitting 1.2W @ 350mA / 1.7W @ 500mA / 2.4W @ 700mA
Max output (Lumens) at 3000K

350mA:-  75lm
500mA:-  99lm
700mA:-  127lm

What is this?

How hard the fitting is run. The higher the mA the more light output.

What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

What is this?

The colour of light. We use 2700K and 3000K most often.

What is this?

The narrower the beam the more focused the light and the further it travels.

What is this?

The colour and finish of the bezel.


* Required Fields



LD72 is a miniature LED downlight ideal for display, niches or general accent downlighting effects. It is very discreet with the LED set back by 10mm to reduce the glare.

It utilizes the latest LED technology with a typical CRI of 93 in warm white.  As standard the LD72 is IP40 rated, but can be specified as IP54 for wet environments like bathrooms and spa areas.

Fixing is by 2 spring fixing clips.  Comes pre-wired with a 2 core 100mm lead.

The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.  LD72 can be driven up to a current of 700mA (2.4W) at an ambient of 35°C. If using in ambient temperatures of up to 45°C or very small voids then specify at 500mA max, LD72-500.   Run at 350mA for lighting particularly small areas or for the most subtle effect.

Driver Options

The LD72 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver 

Installation Notes

The cable run between the driver and the fittings shouldn't exceed 10m.  The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.

N.B.  Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.


View FileLD72 Data Sheet    Size: (646.79 KB)

Ask a question

  • This field is for validation purposes and should be left unchanged.