Miniature but punchy IP40 LED spotlight delivering 127 lumens. The spotlight is mounted on a matching knuckle joint allowing easy adjustment and focusing, and the stem comes in different lengths.
It’s performance is the same as the LD51. The differences are the fixing method, the knuckle detail, cowl detail (available on the LD51 only) and the IP rating.
Comes pre-wired with a 2 core 100mm lead.
The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.
The LD82 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
|LD82 Data Sheet Size: (621.07 KB)|