LD82/M3 - LED spotlight for picture lighting
Move your mouse over image

  • LD82/M3 - LED spotlight for picture lighting
  • LD82/M3 - LED spotlight for picture lighting
  • LD82/M3 - LED spotlight for picture lighting
  • LD82/M3 - LED spotlight for picture lighting

LD82/M3 - LED spotlight for picture lighting

Miniature but punchy LED spotlight mounted on a curved arm ideal for lighting artwork

For instances where a more traditional picture light would be too big v’s the artwork the LD82 mounted on a picture light arm is a neat solution. With a choice of beam angles from narrow to wide there are options to suit almost all subjects and styles. The arm height is adjustable with the use of the fixing bracket

The best way of lighting a picture totally depends on the canvas size/focal point and the subject matter

The following comments are intended as guides only - Once the canvas size or the subject matter on canvas exceeds 350mm (wide) by 550mm (high) then the more traditional linear picture light would become more appropriate, like our sleek slimline high quality 24V high CRI range picture light or our top of the range bespoke Artview picture light 

Interior use only

Typical CRI of 93 with a Warm White LED

Quality of light is excellent and longevity is achieved with very good thermal management

A 50,000 life expectancy and a 3 year fitting warranty

UK flagDesigned and made in the UK.


To get the perfect results you choose the product attributes (eg output, beam width etc) below. The fittings need a separate driver and you will be taken through to the Driver Options page next. Because you are taken through automatically when you add fittings to the Basket, we suggest you read the Technical Section below first. This will help you make the right driver choice. For help with all the product attribute choices read our Technical Reference Guide (see pdf download below)

Average delivery 2-4 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA, 700mA
Max Watts/Fitting 1.2W @ 350mA
1.7W @ 500mA
2.4W @ 700mA
Max output (Lumens) at 3000K 350mA:- 107lm
500mA:- 146lm
700mA:- 195lm
What is this?

How hard the fitting is run. The higher the mA the more light output.

What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

What is this?

The colour of light. We use 2700K and 3000K most often.

What is this?

The narrower the beam the more focused the light and the further it travels.

What is this?

The colour and finish of the bezel.


* Required Fields



The LD83/M3 is a neat way to light artwork as the miniature adjustable spotlight is mounted on a curved arm allowing the light to be directed back on the subject

Getting the right solution to lighting artwork is something we at Brilliant Lighting are very passionate about. With the help of leading UK lighting manufacturing company we have also developed the bespoke Artview picture light for lighting large canvases 

The higher the current mA the fitting is run at the more light you will get but the warmer the fittings gets. The LD82/M3 can be driven up to a current of 700mA (2.4W) with an ambient temperature of 35°C.

Driver options

The LD82/M3 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver

Installation Notes

The fittings should be wired in series and the cable run between the driver and the fitting should not exceed 10m. The driver should be located somewhere discrete, allowing air movement and be accessible for maintenance


View FileLD82-M3    Size: (638.03 KB)

Ask a question