LD65
Move your mouse over image

  • LD65
  • LD65 LED accent light
  • Product Dimensions.  All measurements are in mm.
LGPX LD65

LD65 LED accent light

Small robust IP67 LED fitting. Gives a striking horizontal wash of light across wall or floor in two directions.  

This unusual fitting utilises a specially designed reflector to wash the surface around it in two directions. Milled from a solid billet of stainless steel, it is quite happy being walked over (and it's smooth enough that your feet don't mind either!).  Great for lighting steps or paths, or if used wall mounted, creating an interesting pattern of light on the wall.

IP67 rated for mounting onto interior or exterior pathways, staircases and walls, they have an integral anti wicking barrier to increase protection against moisture ingress due to incorrect IP rated cable connections.

LD64 also available with one aperture for light spill in one direction only. 

Quality of light is excellent and longevity is achieved with very good thermal management.  

A 50,000 life expectancy and a 3 Year fitting warranty. 

Designed and made in the UK.

To get the perfect results you choose the product attributes (eg; output) below.  These fittings need a separate driver and you will be taken through to the Driver Options page next.  Because you are taken through automatically when you add fittings to the Basket, we suggest that you read the Technical Section below first.  This will help you make the right driver choice.  For help with all of the product attribute choices please read our Technical Reference Guide (see pdf download below).  

See the product spec sheet in Downloads for fixing options.  If you require an Install Sleeve more quickly than you need the fittings themselves please ask for 'Installation Accessories Advance Shipment' after you've added the fittings to your Basket.

Average delivery 2-4 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA
Max Watts/Fitting 1.2W @ 350mA / 1.7W @ 500mA
Max output (Lumens) at 3000K Not available
What is this?

How hard the fitting is run. The higher the mA the more light output.

X
What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

X
What is this?

The colour of light. We use 2700K and 3000K most often.

X
What is this?

The colour and finish of the bezel.

X
What is this?

Chose a fixing method appropriate to where the fitting is going.

X

* Required Fields

£176.72

Technical

Small, robust LED fitting utilising a specially designed reflector to wash the surface around it in two directions. Milled from a solid billet of stainless steel, it is quite happy being walked over (and it's smooth enough that your feet don't mind either!).

IP67 rated for mounting onto interior or exterior pathways, staircases and walls.  LD64 also available with one aperture for light spill in one direction only. 

See the product spec sheet in Resources for fixing options.  Comes pre-wired with a 2 core 100mm cable.

The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.  

Driver Options

The LD65 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver 

Installation Notes

The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m.  The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.

N.B.  Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.

Resource

View FileLD64 & LD65 Data Sheet    Size: (896.65 KB)

Ask a question

  • This field is for validation purposes and should be left unchanged.