LD151-E1
Move your mouse over image

  • LD151-E1
  • as standard - no glare shield
  • with standard glare shield - reduces output by 30%
  • with half moon glare shield - reduces output by 50 - 60%
  • wall wash effect
  • LD151-E3 LED uplight
  • LD151-E3 LED uplight
  • Product Dimensions.  All measurements are in mm.
  • 484N Concrete Housing
  • 484N Concrete Housing Dimensions.  All measurements are in mm.
LGPX LD151-E3

LD151-E3 LED uplight

A fabulous quality IP67 high powered with optional glare shields for a very low glare recessed uplight, designed specifically to light walls and columns.  

This high quality uplight is very powerful luminaire for its size and depth.  It delivers 318 lumens although this is reduced to 223 lumens by the glare shield. It has been designed specifically to produce low glare illumination to walls and columns, with a glare shield and deep recessed lamp.  The 4die LED chip is small, and with the use of a single lens produces a very consistent even beam. 

Lens options are a 10° spot for lighting columns and arches or a 15° x 30° spreader lens which is ideal for wall washing. Comes with a glare shield as standard, which has been developed to minimise the view of the intense light source without affecting the wash of light on the wall/column.

Available in Warm White, White and Red/Green/Blue/White (RGBW) for details on the colour changing option please contact us. 

Quality of light is excellent and longevity is achieved with very good thermal management.  

A 50,000 life expectancy and a 3 Year fitting warranty. 

UK FlagDesigned and made in the UK.

To get the perfect results you choose the product attributes (eg; output, beam width etc) below.  These fittings need a separate driver and you will be taken through to the Driver Options page next.  Because you are taken through automatically when you add fittings to the Basket, we suggest that you read the Technical Section below first.  This will help you make the right driver choice.  For help with all of the product attribute choices please read our Technical Reference Guide (see pdf download below). 

Average delivery 4-6 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA
Max Watts/Fitting 5W @ 350mA / 7W @ 500mA
Max output (Lumens) at 3000K

350mA:-  347lm
500mA:-  437lm
lumen output quoted without glare shield.

What is this?

How hard the fitting is run. The higher the mA the more light output.

X
What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

X
What is this?

The colour of light. We use 2700K and 3000K most often.

X
What is this?

The narrower the beam the more focused the light and the further it travels.

X
What is this?

The colour and finish of the bezel.

X
What is this?

Reduces glare when the fitting is seen from one side. Also reduces light output on that side.

X
What is this?

Chose a fixing method appropriate to where the fitting is going.

X

* Required Fields

£243.68

Technical

The IP67 rated LD151 buried uplighter is a very powerful luminaire for its size and depth. 

Available in Warm White, White and Red/Green/Blue/White (RGBW) for details on the colour changing option please contact us.

With no visible fixings the LD151 is held into the sleeve or concrete housings by ‘O’ rings. This creates a watertight seal (to protect against water ingress in to the floor below) and allows the fitting to be installed after the completion of all construction and decoration work.  It also facilitates future maintenance.

It is imperative that any connections made in wet environments are IP68 rated.  So for example if using the fittings with the concrete housing outside, you must ensure that the connections made with the driver are properly water tight.   Comes pre-wired with a 2 core 100mm cable.

Driver Options

The LD151 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver

Installation Notes

The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m.  The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.

N.B.  Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.

Resource

View FileLD151 Data Sheet    Size: (739.55 KB)

Ask a question

  • This field is for validation purposes and should be left unchanged.