Technical
LD43W is a miniature recessed LED uplight, the LED set back with the added integral glare shield to reduce glare
To get the perfect results to suite your application you choose the product attributes (eg - output, beam width etc) The higher the current (mA) the fitting is run at the more light you will get
Hidden fixing method - no screws, this is achieved by either using the standard spring clips or the optional fixing sleeve ideal for solid flooring
IP66 rated from the front only meaning it is perfect for use in bathrooms and spas but not exterior applications. For exterior applications please use an alternative fitting for example LD41, LD56, LD60, LD43DR
With delivered lumens of 95 (when run at 500mA) and a CRI of 93 the quality of light is excellent and longevity is achieved with very good thermal management. LED lifetime (to 70% lumen maintenance) 50,000hrs at a max ambient temperature of 35°C
Designed and manufactured in the UK
Driver options
The LD43W is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
Installation Notes
The fittings should be wired in series and the cable run between the driver and the fitting should not exceed 10m. The driver should be located somewhere discrete, allowing air movement and be accessible for maintenance
Resource
LD43, LD43A, LD43W Size: (611.37 KB) |