LD42A is a miniature, very low glare recessed LED, useful for floor and step illumination and internal/external highlights.
See the product spec sheet in Downloads for fixing options. If you require an Install Sleeve more quickly than you need the fittings themselves please ask for 'Installation Accessories Advance Shipment' after you've added the fittings to your Basket.
Comes pre-wired with a 2 core 100mm lead.
The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.
The LD42A is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
The cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
|LD42A Data Sheet Size: (680.52 KB)|