TXDEL350DALI - DALI dimmable Constant Current Driver.  

LEDs use specific drivers to run them, they are different from normal low voltage fittings in that they must be wired in series and need a constant current.  They may be located 10 metres from a luminaire, with an ‘in series’ wiring method required.

DALI drivers (such as this one) need two types of cable coming from the dimming module: one to carry power and one to carry the DALI signal.  The power cable is straightforward and is whatever the electrician would normally use, and then in addition to this a mains rated 1.5mm cable is used to carry the DALI signal. Although you need two types of cable (for power + DALI) between the dimming module and the driver, you only need one type (power) between the driver and the LED fittings. For more details on dimming by DALI please see our 'Technical Buyers Guide'  

If using dedicated LED fittings 1.2W/350mA drivers will run 1 - 14 fittings

Specification

Number of ouptuts/circuits: 1

Dimmable: DALI

Output Current (mA): 350mA

Output Voltage (V): 2-55V

Dimensions L x W x H (mm): 210x41x34mm

Hole Cut - out (mm): 51Ø

IP Rating: Not IP rated.  If this is required it is supplied in IP Rated Box - please ask.