Technical
TXDTC350PHD Phase/Mains Dimmable LED Constant Current Driver
LEDs use specific drivers to run them, they are different from normal low voltage fittings in that they must be wired in series and need a constant current. They may be located 10 metres from a luminaire, with an ‘in series’ wiring method required.
Phase/Mains trailing & leading edge (5 – 100%) dimmable drivers must always be specified with care as there are many factors that can effect how well they dim. If possible on a project it is best to use mains dimmable drivers from the same manufacturer, especially if they are on the same circuit. For more details on dimming see our 'Technical Buyers Guide'
If using dedicated LED fittings 1.2W/350mA drivers will run 1 - 11 fittings
Specification
Number of outputs/circuits: 1
Dimmable: 240V leading/trailing edge
Output Current (mA): 350mA
Output Voltage (V): 2-47V
Dimensions L x W x H (mm): 166x46x34
Hole Cut - out (mm): 51Ø
IP Rating: Not IP rated. If this is required it is supplied in IP rated box - please ask
Resource
TXDTC350PHD Size: (145.52 KB) |