LEDs use specific drivers to run them, they are different from normal low voltage fittings in that they must be wired in series and need a constant current. They may be located 10 metres from a luminaire, with an ‘in series’ wiring method required.

If using a dedicated LED fittings 1.7W/500mA driver will run 1 - 14 x fittings

Specification 

Number of outputs/circuits: 1

Dimmable: No

Output Current (mA): 500mA

Output Voltage (V): 2-55V

Dimensions L x W x H (mm): 210x41x34

Hole Cut - out (mm): 51Ø

IP Rating: Not IP rated. If this is required then it can be supplied in IP rated box - please ask.