This miniature wall mounted LED uses a specially designed reflector to wash the surface around it. It utilises a specially designed reflector to produce a 360° angle of illumination (LD61), or 360° plus a 25° narrow beam (LD62).
Manufactured from 316 stainless steel, with a special acrylic reflector.
See the product spec sheet in Downloads for fixing options. Comes pre-wired with a 2 core 100mm cable.
The LD61 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
|LD61 & LD61 Data File Size: (758.62 KB)|