Technical
Small, robust LED fitting utilising a specially designed reflector to wash the surface around it in two directions. Milled from a solid billet of stainless steel, it is quite happy being walked over (and it's smooth enough that your feet don't mind either!).
IP67 rated for mounting onto interior or exterior pathways, staircases and walls. LD64 also available with one aperture for light spill in one direction only.
See the product spec sheet in Resources for fixing options. Comes pre-wired with a 2 core 100mm cable.
The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.
Driver Options
The LD65 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
Installation Notes
The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
Resource
LD64 & LD65 Data Sheet Size: (896.65 KB) |