Move your mouse over image

  • LD61
  • LD61 LED wall light
  • LD61 Dimensions. All measurements are in mm.

LD61 LED wall light

Funky miniature IP67 wall light which generates light around 360°.  Great for adding fun and colour to a scheme.

This miniature LED fitting uses a specially designed reflect or to wash the surface around it.  It can be used on walls or cabinets to create interesting effects as well as lighting up steps and staircases, and the colours look fantastic!  

Manufactured from 316 stainless steel with a specially designed acrylic reflector designed to produce a 360° angle of illumination (LD61), or 360° plus a 25° narrow beam (LD62).

New integral anti-wicking barrier increases protection against moisture ingress due to incorrect IP rated cable connections (IP connections are still required).

Quality of light is excellent and longevity is achieved with very good thermal management.  

A 50,000 life expectancy and a 3 Year fitting warranty. 

Designed and made in the UK.

To get the perfect results you choose the product attributes (eg; output, colour etc) below.  These fittings need a separate driver and you will be taken through to the Driver Options page next.  Because you are taken through automatically when you add fittings to the Basket, we suggest that you read the Technical Section below first.  This will help you make the right driver choice.  For help with all of the product attribute choices please read our Technical Reference Guide (see pdf download below).  

See the product spec sheet in Downloads for fixing options.  If you require an Install Sleeve more quickly than you need the fittings themselves please ask for 'Installation Accessories Advance Shipment' after you've added the fittings to your Basket.

Average delivery 4-6 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA
Max Watts/Fitting 1.2W @ 350mA / 1.7W @ 500mA
Max output (Lumens) at 3000K Not measured
What is this?

How hard the fitting is run. The higher the mA the more light output.

What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

What is this?

The colour of light. We use 2700K and 3000K most often.

What is this?

The colour and finish of the bezel.

What is this?

Chose a fixing method appropriate to where the fitting is going.


* Required Fields



This miniature wall mounted LED uses a specially designed reflector to wash the surface around it.  It utilises a specially designed reflector to produce a 360° angle of illumination (LD61), or 360° plus a 25° narrow beam (LD62).

Manufactured from 316 stainless steel, with a special acrylic reflector.

See the product spec sheet in Downloads for fixing options.  Comes pre-wired with a 2 core 100mm cable.

Driver Options

The LD61 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver 

Installation Notes

The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m.  The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.

N.B.  Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.


View FileLD61 & LD61 Data File    Size: (758.62 KB)

Ask a question

  • This field is for validation purposes and should be left unchanged.