LD46
Move your mouse over image

  • LD46
  • Product Dimensions.  Measurements are in mm.
LGPX LD46

LD46 LED wall light

Punchy but discrete low glare recessed wall light, delivering 126 lumens.  Great for steps and floor washes.

Has either square (LD45) or round (LD46) bezel.  It has a recessed optic, without a tilt, and has no visible fixings.  It looks particularly effective when used for stair lighting, mounted close to each tread.  A high Colour Rendering Index (CRI) of 93 brings out the colours of the materials being lit.

Can be used for internal or external applications and has an integral anti-wicking barrier to increase protection against moisture ingress due to incorrect IP rated cable connections (although waterproof connections are still required).  Does not have toughened glass - if this is needed use an LD56.

Quality of light is excellent and longevity is achieved with very good thermal management.  

A 50,000 life expectancy and a 3 Year fitting warranty. 

Designed and made in the UK.

To get the perfect results you choose the product attributes (eg; output, beam width etc) below.  These fittings need a separate driver and you will be taken through to the Driver Options page next.  Because you are taken through automatically when you add fittings to the Basket, we suggest that you read the Technical Section below first.  This will help you make the right driver choice.  For help with all of the product attribute choices please read our Technical Reference Guide (see pdf download below).  

See the product spec sheet in Downloads for fixing options.  If you require an Install Sleeve more quickly than you need the fittings themselves please ask for 'Installation Accessories Advance Shipment' after you've added the fittings to your Basket.

Average delivery 2-4 Weeks
Lamp Base N/A
Light Source Dedicated LED
Energy efficient? Yes (Part L Compliant)
Fitting Input 350mA, 500mA, 700mA
Max Watts/Fitting 1.2W @ 350mA / 1.7W @ 500mA / 2.4W @ 700mA
Max output (Lumens) at 3000K No
What is this?

How hard the fitting is run. The higher the mA the more light output.

X
What is this?

We'll tell you how many fittings you can drive with your driver option on the next page.

X
What is this?

The colour of light. We use 2700K and 3000K most often.

X
What is this?

The narrower the beam the more focused the light and the further it travels.

X
What is this?

The colour and finish of the bezel.

X
What is this?

Chose a fixing method appropriate to where the fitting is going.

X

* Required Fields

£118.61

Technical

This discrete low glare recessed IP65 wall light with either square (LD45) or round (LD46) bezel.  It has a recessed optic, without a tilt, and no visible fixings.  

See the product spec sheet in Downloads for fixing options.  Comes pre-wired with a 2 core 100mm cable.

The higher the current (mA) the fitting is run at the more light you will get but the warmer the fitting gets.  

Driver Options

The LD46 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series

With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver 

Installation Notes

The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m.  The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.

N.B.  Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.

Resource

View FileLD45 & LD46 Data Sheet    Size: (876.65 KB)

Ask a question

  • This field is for validation purposes and should be left unchanged.