Technical
Designed as a mirror light the LD63 fitting looks just as great as feature decorative fitting to give a space an interesting look and design
Due to the low heat and two diffused surfaces this fitting is perfect for facial light
As standard the LD63 is IP rated making it suitable for use within wet environments such as bathrooms or spas
The higher the current mA the fitting is run at the more light you will get but the warmer the fittings gets. The LD63 can be driven up to a current of 500mA (1.7W) with an ambient temperature of 35°C.
Driver options
The LD63 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
Installation Notes
The fittings should be wired in series and the cable run between the driver and the fitting should not exceed 10m. The driver should be located somewhere discrete, allowing air movement and be accessible for maintenance
Resource
LD63 Size: (629.53 KB) |