Technical
This miniature wall mounted IP67 LED uses a specially designed reflector to wash the surface around it. It can be used on walls to create interesting effects as well as lighting up steps and staircases, and the colours look fantastic!
New integral anti-wicking barrier increases protection against moisture ingress due to incorrect IP rated cable connections (IP connections are still required).
See the product spec sheet in Downloads for fixing options. Comes pre-wired with a 2 core 100mm cable.
Driver Options
The LD62 is a constant current fitting which requires a driver to run it, drivers can run multiple fittings but fittings must be wired in series
With an appropriate driver the fitting is dimmable via 0-10V, DALI and Mains leading/trailing edge or non-dim. Please select dimming type on options tab above and that will take you through to a page detailing how many fittings you can run per driver
Installation Notes
The fittings should be wired in series, and the cable run between the driver and the fittings shouldn't exceed 10m. The driver should be located somewhere discrete, allowing air movement, and accessible for maintenance.
N.B. Please read The Lighting Buyer's Technical Reference Guide for recommendations and watch-outs around different dimming methods and LED wiring.
Resource
LD61 & LD61 Data File Size: (758.62 KB) |